
5
How It Works
Page 2 of the Installaon Guide illustrates your type of exisng dierenal and idenes
its relevant parts. Page 3 of the Installaon Guide shows an exploded view of the Pow-
ertrax No-Slip Tracon System and idenes its components. It is designed to t exactly
into your exisng dierenal without any machining of parts. If, for whatever reason, you
wish to return the dierenal back to its original conguraon, the Powertrax No-Slip
Tracon System can be easily removed and the original parts reinstalled. Therefore, we
recommend that you retain all original dierenal parts.
Installaon of the Powertrax No-Slip Tracon System should proceed easily. If parts ap-
pear not to t properly, do not force or modify them in any way. Check again that you
have the right Powertrax No-Slip Tracon System model for your dierenal and be sure
that you are following the installaon instrucons correctly. If necessary, call Powertrax
for assistance. Do not aempt to drive your vehicle if the enre installaon process did
not proceed as described. By replacing the exisng parts in your “dierenal case” with
the Powertrax No-Slip Tracon System, your dierenal’s power distribuon characteris-
cs will be upgraded for maximum tracon output. The aicon caused by “spider” and
“side gears” that direct power to a slipping wheel is totally eliminated.
The “pinion gear” carries the engine power to the “ring gear” which is aached to the
dierenal case. The rotang dierenal case transfers the power to the “axle shas”
through the components within the dierenal case. The exisng “pinion sha” is re-
placed with a high strength Zytanium® pinion sha. It transfers the power from the dier-
enal case to the “drivers”. The drivers eliminate the exisng “spider gears”. Both drivers
are connected to mang “couplers” which join onto the axle sha splines. The couplers
replace the exisng “side gears”. The Powertrax No-Slip Tracon System obsoletes any
fricon clutches and related parts that may also accompany the spider and side gears.
Comentarios a estos manuales